about-me variable
AHLSTROM-MUNKSJÖ invites you to their event

5️⃣ critical moments when the paper backing's BACK impacts the coated abrasive performance

About this event

Rediscover the back of your abrasive paper backing and give your coated abrasives the edge by exploring 5 critical moments known for the issues they can create in your process or during end use.


1️⃣ Festoon slippage issues

💥 During drying, you see that the paper slips on the festoons. Difficult in that case to keep up the pace of the process and achieve homogeneous drying.

🔬You'll learn to :

-> identify an efficient antislip back from another

-> discover FG, a tried-and-tested Festoon Grip solution

🍒 [bonus] : introduction of the INCLINED PLANE, an original antislip measurement method for evaluating antislip superpower


2️⃣ Rewetting

💥Rewetting is a key step for ensuring a quality product: the problem is that not all papers react the same way.

🔬You'll learn to :

--> Understand how different paper types impact rewetting

--> Identify solutions that facilitate rewetting

🍒 [bonus] : a super practical method where you do the tests and manipulations live


3️⃣ Velcro-PSA lamination

💥 Laminating Velcro or a PSA is a complex affair: the result depends as much on the nature of the substrate as on the adhesive and the quality of the Velcro and PSA.

🔬You'll learn to :

--> Evaluate the adhesion performance between a paper and Velcro or PSA

🍒 [bonus] : a step-by-step tutorial that will enable you to evaluate your formulations


4️⃣ Marketing & Sales touch

💥The back side of the paper must be a communication surface to get messages across to end users.

🔬You'll learn to :

--> Get the best rendering possible on the visible part of the paper: NO to runny prints! YES to a sexy product!

🍒 [bonus] : solutions-to-go to improve the look of your products, help to position them in the premium range and boost your sales


5️⃣ Slippage during sanding

💥Providing an antislip solution for sanding in a dry or wet environment is essential for good sanding ergonomics.

🔬You'll learn to :

-->Identify an effective antislip back from another back

--> Discover AS and ZS, tried-and-tested antislip solutions

🍒 [bonus] : an adaptation of the INCLINED PLANE method to simulate sanding conditions


📦 🧪 By registering to this webinar, you will receive a Coffee Box, containing your chemistry set with creative catalyst to hone your knowledge and live a fun, interactive Coffee Break with us! Make sure you enter the address where you want us to send it.

To make sure you experience a unique learning break and make sure your box arrive in time, register before 22nd of November. [Early birds registering before November 5th will receive an additional surprise.]


👉 Register now to keep bright ideas brewing !

Select one of the two slots using the arrow in the header : Tuesday 7 December 2021 at 4:30 pm CET | Thursday 9 december at 9:00 am CET




Hosted by

  • Team member
    T
    Estelle Seibert Marketing Manager @ Ahlstrom-Munksjö

    I am a committed and passionate B-to-B 👩 💼 Marketing Specialist with fifteen years of experience in the paper industry and in the abrasive business.

  • Guest speaker
    G
    Thierry Mayade Abrasive R&D Manager @ Ahlstrom-Munksjo

    30-year experienced paper engineer, PhD graduate in process engineering from the National Polytechnical Institute in Grenoble. 22 years expertise in abrasive backings development, in their chemical formulation and physical properties.

  • Guest speaker
    G
    Francis Poirot Technical Director @ Ahsltrom-Munksjo

    Abrasive backing expert & 20-year experienced paper specialist focused on quality and customer satisfaction.

AHLSTROM-MUNKSJÖ

The Abrasive Backing Expert 🔺DediCOATED 3.0 organizer

Ahlstrom-Munksjö is a global company that provides top-quality fiber-based solutions for coated and bonded abrasives : wet or dry paper backings (latex, antistatic treated * saturating bases * composites for sustainable cloth alternatives), blotters and backings for fiberglass meshes.