about-me variable
DENSsolutions invites you to their event

Nanotalk - In-situ heating correlative studies for additively manufactured and irradiated materials

About this event

In this DENSsolutions Nanotalk, Dr. Mihaela Albu from the Graz University of Technology, Institute of Electron Microscopy and Nanoanalysis presents all about 3D additively manufactured parts.

Simply enter your email address above and click "Watch now" to register. You will receive an email directly after with a link to watch this Nanotalk.


Characterization at high resolution has enabled a fundamental understanding of atomic effects and processes in materials, opening up a new era in materials design. One category of materials that are likely to feature drastic changes in nano- and microstructure are additively manufactured materials. This relatively new technology, 3D printing, allows for the design of new alloys and combinations of alloys. However, the micro- and nanostructure of the 3D printed parts is strongly influenced by the fast cooling process, which although enables the formation of complementary metastable phases, is not experimentally verified.

In this webinar, Dr. Mihaela and her colleagues present analytical STEM correlative in-situ heating experiments performed on additively manufactured parts and irradiated materials. Although in-situ heating experiments are very useful to clarify morphology changes, combining them with analytical capabilities such as X-ray spectrometry (EDX) and electron energy loss spectroscopy (EELS) provides complementary information on chemical changes and diffusion of elements.

With the help of our Wildfire system, Dr. Mihaela and her team observe the crystallization of existing amorphous phases and the coarsening/shrinkage of grains in 3D printed materials. EDX spectrometry provided complementary information on the diffusion of alloying elements and the nucleation and development of secondary phases at different temperatures. By comparing scanning calorimetry measurements with the in-situ heating studies, they were able to determine the relative temperature at which a particular phase crystallization and transformation occurs. Moreover, using EELS, the detection of very light elements such as helium and tritium was made possible.

Register now for free to watch this Nanotalk!

Hosted by

  • Team member
    Lama Elboreini Marketing Communications Specialist @ DENSsolutions

  • Guest speaker
    Mihaela Albu Senior Researcher @ Graz University of Technology, Institute of Electron Microscopy and Nanoanalysis


We care, we innovate, we deliver

Advanced in situ TEM solutions for heating, biasing, gas and liquid experiments. Stimulate your sample and start capturing dynamics today.